Sennheiser XSW-D Vocal Set - Wireless Handheld Microphone System

The set comes with the XS 1 handheld cardioid dynamic microphone along with a plug-on transmitter and an XLR-equipped plug-in receiver, both featuring lightweight, miniature housings. The system connects to a wide variety of professional audio gear including mixing boards and portable PA systems, allowing you to capture crisp-sounding vocals on stage, or in rehearsals, houses of worship, and event spaces.

Key features

- One touch ease-of-use
- 2.4 GHz digital transmission for worldwide operation
- 75m range (250ft) in optimal conditions
- Up to 5 hours battery life on a single charge
- Switch between multiple transmitters linked to one receiver
- Configure any combination of transmitters and receivers
- Mute from either transmitter or receiver

Lose the cables, keep the connection

Essentially a cable replacement, XS Wireless Digital uses a 2.4 GHz transmission to create a wireless peer-to-peer connection. Simply plug the transmitter into any dynamic XLR vocal mic and the receiver into your mixer or active PA speaker. As soon as you see the green light, you’re good to go. As a liberating solution for the musician moving about on stage, or a convenient approach to the rehearsal room, this wireless tool empowers your inner creativity by allowing you to roam free.

As easy as it gets

Each XS Wireless Digital transmitter and receiver have only one button. Press to power up and link simultaneously, click once to mute, and hold to power down. What’s more, they each feature a single LED that indicates when your connection is secure or when it’s time to charge the battery. There are no menus to fuss with or settings to worry about. It’s almost as easy as plugging in a cable, minus the cable part.

Spec

Dimensions: XSW-D XLR FEMALE TX: approx. 102 x 24 x 28 mm, XSW-D MINI JACK TX: approx. 86 x 24 x 28 mm, XSW-D INSTRUMENT TX: approx. 122 x 24 x 28 mm , SW-D XLR MALE RX: approx. 109 x 24 x 28 mm, XSW-D MINI JACK RX: approx. 86 x 24 x 28 mm, XSW-D INSTRUMENT RX: approx. 122 x 24 x 28 mm, XSW-D PEDALBOARD RX: approx. 130 x 82 x 51 mm
THD, total harmonic distortion:  < 0.1 %
Charging time: typ. 3 h
Audio output: max. 12 dBu
Operating temperature: -10 °C to +55 °C (14 °F to 131 °F)
Signal-to-noise ratio: ≥ 106 dB
Operating time: up to 5 h
Modulation: GFSK with TDMA
Battery Specification: Li-Ion
Capacity: 850 mAh
Codecs: aptX® Live
Frequency range: 2,400 - 2,483.5MHz
Max. Input voltage: typ. 5.0 V
Transmission power: max. 10 mW
Voltage: 3.7 V
Operating relative humidity: 95 % (non-condensing)
Latency: < 4 ms
Temperature Range: 0 °C - 60 °C (32 °F - 140 °F)
Audio frequency response: 3.5 mm Jack/XLR: 80 - 18,000 Hz, 6.3 mm Jack: 10 - 18,000 Hz