Features:

Tuned for NAS with NASware - Western Digital’s exclusive NASware™ technology fine-tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.

Designed for Continuous Operation—A reliable drive is essential since your NAS system is always on. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.

Tested for Dependable Compatibility - Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.

Optimized for Lower TCO - WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.

Powered for Strong Performance - Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.

Balanced for Increased Reliability—Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce the hard drive's life span and degrade its performance over time. Our enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.

Backed by World-Class Support and Warranty - As an industry-leading hard drive manufacturer, Western Digital stands behind its NAS storage solutions with the assurance of a 3-year limited warranty and world-class support services for hassle-free data storage.

Desktop drives vs. WD Red® Plus:

Choosing a drive purpose-built for RAID-optimized NAS systems is important to ensure optimum performance and preserve your valuable data. Take the following into consideration when choosing a hard drive for your NAS:
• Compatibility: Unlike desktop drives, WD Red Plus hard drives are specifically designed and tested for NAS and include NASware™ technology, which fine-tunes drive parameters to match NAS system workloads for optimum performance.
• Reliability: Desktop drives aren’t typically designed for the demands of an always-on NAS environment. WD Red Plus hard drives are designed to perform under tough conditions encountered in high-intensity 24x7 multi-user NAS environments.
• RAID Ready: WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.
• Noise and Vibration Protection: Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.

---

Cache: 256MB
Interface: SATA3 6GB/s
Internal transfer rate: 180 MB/s
Load/unload cycles: 600
000
MTBF: 1
000
000 hours
Recording technology: CMR
RPM: 5400 RPM
Storage Capacity: 6TB
WD WD60EFPX 6TB Red Plus 3.5" 5400RPM SATA3 NAS Hard Drive
WD60EFPX
Workload rate: 180 TB/year