Thermaltake Toughpower GF3 1200W 80+ Gold PCIe5 ATX 3.0 Modular Power Supply

Power Up the Next Generation Hardware

Designed with a native PCIe 12+4pin modular connector, the Toughpower GF3 Snow series is built for next-gen PCIe 5.0 graphics cards and is compatible with Intel ATX 3.0 specifications. The GF3 Snow series delivers 80 PLUS Gold efficiency, it also offers stability, durability, and reliability. For users who crave for a pure white build, this power supply can definitely meet their demands. 

Fully Compatible with Intel ATX 3.0 Standards

Toughpower GF A3 Snow series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards. 

PCIe Gen 5.0 Ready

Toughpower GF3 Snow series comes with a 12+4pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 12+4pin (12VHPWR) PCIe connector of the GF3 Snow 1200W can deliver up to 600W for PCIe 5.0 graphics cards. 

Note:
1. Recommended wattage is an estimation of system power demand. Actual power demands may vary based on specific components, usage, and many other factors.
2. Please follow the recommended power requirements from the GPU manufactures before using the 12VHPWR cable. 

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The GF3 Snow series is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & entry RTX 40 series graphics cards, it also comes with a 1 x 12+4pin connector for RTX 40 series cards that need a PCIe Gen 5.0 connector, ready to supply the graphics cards according to their different ways of connections. 

Be Smart, Stay Quiet

Features a 140mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will the fan will not spin until the load exceeds 20% of the power supply, minimising undesired noise. 

<30mV Low Ripple Noise Design

Top-end build quality with low ripple noise. All ripples are lower than 30mV on +12V, +5V or +3.3V from 0% to 100% load to ensure a stable operation and keep your performance-critical components to function reliably for longer. 

High Quality Japanese Main Electrolytic Capacitor

High quality Japanese main electrolytic capacitor greatly improves the power supplies durability and ensures the Toughpower GF A3 Snow series is stability and reliability.

High Amperage Single +12V Rail & High-Class Technologies

Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation. 

Fully Modular Low-Profile Cables

Offers cable selection for users while powering the system at an advantageous voltage. Low-profile white cables make cable management easier, reduces clutter and increases airflow inside the chassis.

80 PLUS Gold Certified and Lake C6/C7 States Ready

Toughpower GF A3 Snow Gold series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS Gold. It has been optimized to work with all generations of Intel’s processors to achieve maximum energy savings.

Built-in industrial grade protection

To protect the hardware, the GF A3 Snow is built with industry grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).