Antec C7 ARGB Tempered Glass Mid-Tower E-ATX Case - White

C7 - CONSTELLATION SERIES

VERTICAL COOLING

Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow.

MULTI-DIRECTIONAL AIR INTAKE AND MASSIVE AIRFLOW

Fine mesh on the top and right panel, and a great number of vents on the front, left and bottom of lower chamber provide massive airflow.

PRE-INSTALLED 3 X 120MM ARGB PWM REVERSE FANS & 1 X 140MM ARGB PWM FAN

2 X 360MM RADS

Supports simultaneous installation of 360mm radiators on the top and side.

Side Radiator Installation

Remove the small cover on the PSU shroud to install a side radiator. Overall thickness up to 70mm.
(*When installed a side radiator with more than 52mm thickness, GPU length is limited to 280mm.)

SUPPORT RTX 4090

No interference between side radiator with standard thickness (52mm) and RTX 4090.

ALL REUSABLE FULLY-OPEN
PCI SLOT COVERS

Configured with 7 reusable PCI slot covers, which can be turned 90* to mount the GPU vertically (additional riser cable needed).

Support Back-Connect Motherboards

Plug in cables from behind to give front a cleaner look and a smoother airflow channel.

FLIP DOOR STORAGE

Right flip door supports up to 2 x 3.5" HDD /2.5" SSD and 2 x 2.5" SSD. The tray in the case bottom accommodates 3.5" HDD/2.5" SSD.

MULTIPLE HARD DRIVES

Supports multiple hard drives, with different compatibility depending on the form factor of installed motherboard, 3 x 3.5" HDD or 5 x 2.5" SSD at most.

DUST FILTER

Front: Magnetic filter
Left: Magnetic filter
Bottom: Full-size pull-out filter

REAR PULL PSU MOUNT & EVA CUSHION PADS

For easier PSU installation and safer operation.

I/O PANEL

Power
LED Control Button
Type-C 10Gbps x 1
Headphone/Mic Combo Jack
USB 3.0 x2

COOLING COMPATIBILITY