StarTech 2.5 to 3.5 Hard Drive Adapter - For SATA and SAS SSDs/HDDs
SKU# AC23696, Model# 25SATSAS35HD

$62.69

SKU # AC23696 | Model # 25SATSAS35HD

See an error? Click here and let us know

Turn almost any 2.5" SATA/SAS drive into a 3.5" drive - Supports 2.5" hard drives (HDD) and solid state drives (SSD) up to 15mm in height - Installs into an internal or external 3.5" drive bay: uses standard mounting holes for internal installs - Tool-less 2.5” drive installation - Supports SATA I/ II /III (up to 6Gbps) - Support for SAS revision I/II (3.0/6.0 Gbps) - 2.5 to 3.5 Hard Drive Enclosure / 2.5 to 3.5 SSD Adapter / 2.5 to 3.5 HDD Adapter / 2.5 to 3.5 Hard Drive Bay Adapter

Manufacturer Warranty: 2 Years Limited Warranty
Manufacturer Contact Info: http://www.StarTech.com.au,

This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5" drive bay, using standard drive-mounting holes.

Convert a 2.5" drive into a 3.5" drive

The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD.

To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.

Easy and flexible installation

You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required. 

The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look and function like a 3.5" drive.

Identify and track your drives

The adapter includes a label you can use to track and record information about the installed drive.

The 25SATSAS35HD is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Hardware
Number of 2.5 inch bays1
Number of Drives1
Supported Drive Height(s)12.5mm
15mm
7mm
9.5mm
Packaging Information
Package Height35 mm [1.4 in]
Package Length160 mm [6.3 in]
Package Width112 mm [4.4 in]
Shipping (Package) Weight252 g [8.9 oz]
Performance
4Kn SupportYes
Hot Swap CapabilityYes
S.M.A.R.T. SupportYes
TRIM SupportYes
Type and RateSATA/SAS 6 Gbps
Physical Characteristics
ColorSilver & Black
Enclosure TypeAluminum and Plastic
Product Height26 mm [1 in]
Product Length146 mm [5.7 in]
Product Width101 mm [4 in]
Weight of Product252 g [8.9 oz]
Special Notes / Requirements
NoteAlthough mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
What's in the Box
Included in Packagehard drive adapter
quick-start guide
set of mounting hardware
Hardware
InterfaceSATA
SAS
Front Door Key LockNo
Fan(s)No
Drive Size2.5in & 3.5in
Drive InstallationRemovable
Compatible Drive TypesSAS & SATA
Environmental
Storage Temperature-20°C to 55°C (-4°F to 131°F)
Operating Temperature0°C to 55°C (32°F to 131°F)
Humidity5% ~ 65%
Connector(s)
Host ConnectorsSATA Data & Power Combo (7+15 pin) Receptacle
Drive ConnectorsSFF-8482 (29 pin, Data & Power, Internal SAS) Receptacle

SKU # AC23696 | Model # 25SATSAS35HD

See an error? Click here and let us know

loading