Sapphire Nitro+ Radeon RX 7900 XTX 24GB GDDR6 Video Card - Memory Size: 24GB - Memory Type: GDDR6 - Memory Bus: 384-Bit - Stream Processors: 6144 - Boost Clock: Up to 2680MHz - Memory Clock: 20Gbps Effective - Cooling: 3x Vapor-X Cooling Fans - Interface: PCIe 4.0 x16 - Power Connectors: 3x 8-Pin - I/O: 2x HDMI, 2x DisplayPort - Recommended PSU: 800W - Form Factor: 3.5 Slot, ATX - DirectX 12 Ultimate - 11322-01-40G - Open Box

Manufacturer Warranty: 12 Months Limited Warranty

SAPPHIRE PANTHEON

At the core of SAPPHIRE NITRO+ Graphics card are the technologies of the NITRO+ House of PANTHEON. PANTHEON guarantees supreme cooling technology and many distinct features with each NITRO+ iconic feature standing as strong as the pillars of the PANTHEON.

SAPPHIRE NITRO+ sounds the call to battle and is every opponents worst enemy. The long-feared beast of Heat and the dreaded titan of Noise rise from the depths at every chance they can get. SAPPHIRE NITRO+ once again takes on the quest of saving the PC Gaming World and taming these feared monsters. And thus, the legendary NITRO+ House of PANTHEON Was constructed to protect every NITRO+ Graphics Card, taming the monsters Heat & raging Noise. Deep in the forges of this prodigious structure, the legendary pillars of PANTHEON are churned out. Spinning a commanding air vortex to dissipate Heat. Formidable structural components for quality of life and durability. Hardware features engineered to keep NITR0+ running strong and effective. Software integrations to battle Heat & Noise but also customise PANTHEON to the way you like. Personalise NITRO+ PANTHEON to the legendary house you imagine for your SAPPHIRE NITRO+ Graphics Card.

---

AMD RDNA 3 Architecture

- 24GB of GDDR6 memory

- AMD Radiance Display Engine

- DisplayPort 2.1

- AMD FidelityFX Super Resolution

- AMD Radeon Super Resolution

- 4K and Beyond

---

Software BIOS Switch

Switch from OC BIOS to Secondary mode or back using our TriXX software for a quick and easy switch between your dual BIOS modes.

---

Vapor-X Cooling

The Vapor Chamber is mounted in contact with the surface of the main chip and memory. Since the entire area transfers heat at the same rate, the Vapor-X module has been engineered to operate more efficiently than a copper heat sink at carrying away heat. Upon gaining heat, the heat source is pushed to the Vaporisation Wicks to begin the heat dissipation process. Due to extreme low pressure, working fluid and pure water are easily vaporised, and transferred through the vacuum until reaching the Condensing Wick which is adjacent to the cooled surface. From here, it turns back to a liquid state whereby the liquid is then absorbed into the Transportation Wick by capillary action and moved back towards the Vaporisation Wick. A recycled liquid system occurs when the heat source reheats the liquid and it becomes re-vaporised by the Vaporisation Wick to restart the Vapor-X Cooling process.

---

WAVE Fin Design & V-Shape Fin Design for GPU Cooling

The WAVE Fin Design reduces friction when the wind goes into the fin module resulting in a reduction of the wind cut noise. 

The V-shape fin design on top of the GPU accelerates and centralises the air flow around the GPU to dissipate heat efficiently.

---

Die Casted Aluminium-Magnesium Alloy Frame & Frontplate Heatsink

The Die Casted Aluminium-Magnesium Alloy Frame enveloping the sides of the PCB help to strengthen the structural stiffness of the shroud to create a strong, scratch resistant and high quality finish that elevates the aesthetic and strength of the graphics card. Overlaying the entire PCB, the die casted Frontplate Heatsink cools the VRM, Memory and Chokes resulting in superior heat dissipation for top-notch airflow and cooling performance.

---

Digital Power Design

SAPPHIRE NITRO+ & PULSE AMD Radeon RX 7900 Series are designed with digital power which provides accurate power control and excellent power efficiency.

---

Ultra High Performance Conductive Polymer Aluminium Capacitor

The Ultra High Performance Conductive Polymer Aluminium Capacitor has a small PCB foot print but high volumetric capacitance that makes 20-phase power possible on the RX 7900 series graphics card. The capacitor offers stable capacitance at a high frequency and temperature with very low signal noise, ensuring the stability and reliability of the product.

---

High TG Copper PCB

The GPU is mounted on to the high-density 14 layer 2oz Copper and high TG PCB to match the rapid speed, high current and increased power requirement of the GPU and memory to guarantee high stability of the PCB during operation.

---

Tough Metal Backplate

The all-aluminium backplate provides additional rigidity that guarantees nothing bends and dust stays out. It also helps cool your card by increasing heat dissipation.

---

Dedicated VRM Cooling

Dedicated VRM cooling module to create optimal heat dissipation for peak airflow and cooling performance.

---

Angular Velocity Fan Blade

The Angular Velocity Fan Blade  provides a double layer of downward air pressure which alongside the air pressure on the outer ring of the Axial fan, results in up to 44% more downward air pressure and up to 19% more airflow for a quieter and cooler operation when compared to the previous generations.

---

Optimised Composite Heatpipe

The composite heatpipes are fine-tuned for each individual cooling design with optimal heat flow, efficiently and evenly spreading out the heat to the entire cooling module.

---

Assistive System Fan Control

When the temperature of the GPU increases, the graphics card fans speed up accordingly. To further help with cooling and heat dissipation, the Assistive System Fan Control feature in SAPPHIRE’s TriXX software controls the speed of a system fan to automatically increase at the same time as the graphics card fans, this assists in expelling the heated air from the entire system faster.

---

Graphics Card Supporter

Bundled with a graphics card supporter to keep the graphics card in place on the PCIe Slot.

---

Dual ARGB Light Bar

With tasteful shroud design augmented by ARGB LEDs, you can change the colors of the LED, for a customised design. This can be controlled via TriXX software. Choose from different modes including Fan Speed Mode, PCB Temperature Mode or the colourful rainbow mode or turn off the LEDs.

---