Our website is optimized for google chrome, please use google chrome to browse it.
Note: This Router is NBN Ready, however confirm on NBNCo and your ISP for specific connection technology to your address
More info: http://www.nbnco.com.au/
The integrated DSL port supports all standard DSL connections, including VDSL2, ADSL2+, ADSL2, and ADSL.
VDSL/ADSL WiFi Modem Router
Connect to the Internet with your choice of a super-fast DSL or fibre service using the VDSL2/ADSL2+ modem or Ethernet WAN port. The NBN-ready NF10W connects your home or office today, and is equipped with a Gigabit Ethernet WAN port to provide an instant connection to a Fibre / NBN / UFB service when available. Create multiple high speed WiFi connections using the Wireless N300 Access Point, and establish a storage network using the 2 USB ports to share hard drive files with all connected users. Designed to keep you connected as technology evolves, the NF10W features IPv6 for the next generation of IP addressing and offers Layer 2 bridge mode support and a WPS button for simple and secure setup.
Be ready for the future with a router that connects to the NBN’s Fibre to the Node (FTTN) and Fibre to the Premises (FTTP) services. Connect to FTTN using VDSL technology designed to deliver high speeds into buildings; or benefit from FTTP speeds reaching 100Mbps using the Gigabit Ethernet WAN port to access this service.
Access Fibre to the Node (FTTN)
FTTN is set to dominate, and homes and businesses with a VDSL connection will be ready to take immediate advantage of the unmatched speeds offered by the NBN. The NF10W gives you instant access to data speeds exceeding 100 Mbps, both download and upload.
All device features can be shared with multiple users via the built-in WiFi access point or the four LAN Ethernet ports. The high speed WiFi N provides a signal with the power to penetrate the far corners of your house, and you will have the capacity to simultaneously connect multiple WiFi enabled devices such as laptops, smart phones, gaming consoles, tablets and PCs.
USB file sharing
The NF10W comes equipped with two USB host ports that can be used to connect USB devices so their capabilities can be shared with all connected users. Connect a USB hard drive so that all stored files can be accessed and shared.
NetComm Wireless VDSL/ADSL WiFi Modem Router
Printed Quick Start Guide
Ethernet Cable (RJ-45)
Phone Cable (RJ-11)
Wireless Security Card
ENVIRONMENTAL AND PHYSICAL
Operating temperature: 0-40°C, Humidity: 10%-95% non-condensing
Storage temperature: -20-70°C, Humidity: 5%-95% non-condensing
DC Input Voltage 12V/1.5A
Dimensions: 117(W) x 160 (H) x 71 (D) mm
Weight: 300 grams
1 x RJ45 10/100/1000Mbps WAN port
1 x RJ11 VDSL port
4 x RJ45 10/100Mbps LAN ports
2 x USB 2.0 Ports (storage)
1 x Reset button
1 x WPS button
1 x WLAN button
1 x Power jack
1 x Power switch
ITU-T G.993.2 VDSL2
Support 8a, 8b, 12a, 12b, 17a profile
Support ATM and PTM
ITU 992.1 (G.dmt) Annex A,
ITU 992.2 (G.lite),
ITU 992.3 ADSL2 (G.dmt.bis),
ITU 992.5 ADSL2+
Annex L / Annex M
PPPoE, DHCP client, Static IP
IEEE 802.11n. Backwards compatible with IEEE 802.11b/g/a
SSID broadcast or in stealth mode
Auto/Manual Channel selection
WPS button (WiFi Protected Setup)
Dynamic Route (RIP v1/v2)
Supports Layer 2 Bridge Mode
TR-069 Auto provisioning
Specifications are subject to change without notice