Lian-Li UNI FAN AL V2 120mm ARGB PWM Case Fan - 3 Pack with Controller - Black
SKU# AC62033, Model# AL120V2-3B

Lian-Li UNI FAN AL V2 120mm ARGB PWM Case Fan - 3 Pack with Controller - Black - Dimensions: 120 X 120 X 28mm - Fan Speed: 0, 250~2000 RPM - Air Pressure: 2.97 mmH2O (Maximum) - Air Flow: 77.3 CFM - Acoustical Noise: 28.7dB(A) Max - Bearing Type: Fluid Dynamic Bearing (FDB) - Input Power: 7.2W - AL120V2-3B

Manufacturer Warranty: 2 Years Limited Warranty

· Improved daisy chain design to connect 2 clusters of fans

· AL120 V2 fan frame thickness is 28mm to provide 20% improved airflow compared to V1

· Removable interlocking keys to provide better radiator clearance

· Start/stop fan RPM support for a quieter environment

· New corner lighting visible from all sides

UNI FAN AL V2 features an interlocking system to connect up to 6 fans in two clusters to a single controller port, making fan installation and cable management a simple job. New lighting effects have been developed for the updated AL fans, offering more lighting options.

 

---

 

AVAILABLE IN TWO SIZES AND TWO COLORS

 

 

---

 

UPGRADED MODULARITY

UNI FAN AL V2 features an interlocking system to connect up to 6 fans in two clusters to a single controller port, making fans installation and cable management a simple job.

 

1 - SINGLE CABLE TO CONTROLLER

Combo of power and LED cable, reduce cable numbers.

 

2 - PLUG-IN POWER CABLE MODULE

Flush fan frame, reduce clearance issues.

 

3 - SLIDE-IN MECHANISM

Pin-to-pad contact, daisy-chain the fan clusters simply.

 

4 - EXTENSION CABLE

Bridge 2 fan cluster, keep as minor cable as possible.

 

5 - REMOVABLE KEY

Remove the interlocking key to improving compatibility.

 

---

 

THICKER YET EASY TO INSTALL

The UNI FAN AL120 V2 has been amended to a slightly thicker frame of 28mm, and implements indented screw holes to fit standard 25mm long screws for installation.

 

 

Note: The optional 33.8mm long screw set is provided for those who need to mount the UNI FAN AL120 V2 through a fan bracket used in a push-pull rad/fan combo.

 

---

 

ULTIMATE PERFORMANCE ARGB FAN

Running at peak performance while keeping low noise levels, the UNI FAN AL120 V2 is the best-performing ARGB fan within the entire UNI FAN lineup.

 

 

---

 

DURABLE DESIGN

 

 

1 - THICKER IMPELLER

Increased thickness to 28mm for better efficiency

 

2 - MAGNETIC FRAME

To provide extra support for fan blades

 

3 - FLUID DYNAMIC BEARING (FDB)

To effectively reduce the internal friction for improved durability

 

4 - CIRCLIP

To secure the fan blades in place

 

5 - EXTRA MAGNETIC FORCE

To support the fan blades and reduce vibration levels, thus ensuring low noise levels while in operation

 

6 - STATOR

To provide a rotating magnetic field that generates momentum

 

7 - RUBBER PADS

To reduce vibrations and ensure extremely low noise levels

 

---

 

DAZZLING FROM ALL ANGLES

UNI FAN ALV2 has comprehensive lighting all around, independent control of the effects at the fan blades and fan frame, and combined lighting effects.

Sophisticated lighting on the fan blade glows the whole system.

 

The fine LED strips at the four corners of the fan frame and beside the aluminum sides can be set in different colours, creating an elegant look. 

A ring of RGB is visible at the rear side, keeping it attractive no matter as intake or exhaust. 

 

---

MORE LIGHTING EFFECT CHOICES

New lighting effects have been developed for the updated version of the AL fans, offering more lighting options.

 

---

CONTINUOUS LIGHTING EFFECTS

A merge function is available to allow lighting effects to flow not only across a single cluster but across the whole system.

 

---

SIMPLE CONNECTION

Two ways to connect UNI FAN ALV2 fans, adapted to your personal needs.

UNI HUB - 16 Fans in One Go

The included controller in the triple pack (also available separately) can support up to 16 fans and 2 SM-type connected devices to simplify cable management and provide efficient power to the fans.

 

1 - SM TYPE PORT

Compatible with the Galahad AIO pump ARGB cable…etc. Each port supports a 5W maximum output.

SYNC 4 port replicates the lighting effect applied to port 4 and SYNC 2 port replicates the lighting effect applied to port 2

 

2 - FAN GROUP ARGB + PWM SIGNAL

Support one cluster of up to 6 fans

 

3 - USB CABLE

Plug into a motherboard 9-pin USB header.

 

4 - 5V ARGB / 4 PIN PWM CABLE

Required for motherboard sync function.

 

5 - 2×SATA CABLE

For a total maximum input of 29W

Main- SATA: Plug in all circumstances
Sub-SATA: Plug when connecting more than 12 fans or often set to white static colour.

 

Note: Please lower the static white lighting effect’s brightness to 75% when connecting more than 8 x140 or 11 x 120 AL V2 fans synchronized to the motherboard. Failing to do so may cause inaccurate colours.

 

DIRECT TO MOTHERBOARD

The single pack includes a cable module that features a 4-PIN PWM and a 3-PIN SM-type ARGB cable (3P to 3P 5V ARGB cable is included) to connect directly to the motherboard.

 

 

---

 

L-CONNECT 3 SOFTWARE TO CONTROL SL-V2 FANS

Control and preview with precision the lighting effect of the AL-V2 fans with the new L-Connect interface.

Note: L-Connect 3 is only supported when connecting the fans to an ALV2 UNI HUB.

Choose to control lighting effects of fan blades/ edge of fan frame/ both together or set as merge mode

Set personalized colour / brightness / speed / direction

INTELLIGENT START/ STOP FAN

Select fan mode for each group

Turn on to stop fan operating at a set temperature

Customize real-time RPM curve

 

DEFINE THE ORDER

Define fan group name

Set fan quantity each group

Reorder the fan group order

 

---