FujiFilm LTO5 Ultrium 5 1.5/3.0TB Data Cartridge
SKU# AC78575, Model# 71022

FujiFilm LTO5 Ultrium 5 1.5/3.0TB Data Cartridge - 1.5TB in native mode at up to 140 MB/s - up to 3.0TB compressed format at a rate of up to 280 MB/s - Storage: Metal Particle (MP) - 71022

Manufacturer Warranty: 12 Months Limited Warranty

The Fuji LTO5 tape cartridge or Fujifilm LTO Ultrium5 data cartridge 71022 holds up to 1.5TB of data native capacity with up to 3.0TB of compressed data. The Fujifilm LTO Ultrium5 data tape has a transfer rate of up to 140MB/sec while writing data in native capacity and up to 280MB/sec while writing data in compressed capacity. The Fuji LTO 5 tapes have 1280 tracks and a tape length of 846 meters. The Fuji LTO5 tape has a lifetime durability of 1,000,000 passes. A pass is each time the tape changes direction so a backup could have over 1,000 passes depending on the data written.The Fujifilm LTO5 cartridges are backward compatible and therefore suitable for read and write in all LTO5 or LTO Ultrium5 drives, suitable for read and write in all LTO6 LTO Ultrium6 drives, and can be read only in LTO7 or LTO Ultrium7 drives.

FUJIFILM's NANOCUBIC technology has achieved a high capacity and amazing transfer rate to have the capacity of 3.0TB (at 2:1 compression; 1.5TB native) by recording 1,280 data tracks within 12.65mm tape width. Also with the utilization of multi-channel recording technology, LTO G5 data cartridge featured transfer rates of up to 280MB/sec. (at 2:1 compression; 140MB/sec. native). FUJIFILM Servo Technology LTO Ultrium technology relies heavily on timing-based, high-precision servo control to achieve its remarkable performance levels. LTO Ultrium data cartridge uses dual servo tracks that have been precisely written along the entire length of each of its four data bands, for extremely fine placement control and redundancy in the event of tape damages. Improvement in "NANOCUBIC technology" For LTO G5 development, FUJIFILM has further advanced the NANOCUBIC technology with the following key technologies and has successfully achieved higher recording density: (1) Development of finer metal particles (78% of the size of LTO G4) (2) Nano-dispersion technology with a new binder system (3) Advanced nano-coating technology to achieve a much smoother and more uniform magnetic layer resulting in significant decrease in the tape surface defects.

Storage & Operational Requirements for Fujifilm LTO5 Ultrium tape cartridges

LTO cartridges should not be used or stored outside these parameters

- Operational Environment Temperature: 10-45 degrees centigrade
- Operational Environmental Humidity: 10-80% relative humidity
- Short Term Storage Environment Temperature: 16-35 degrees centigrade
- Short Term Storage Environmental Humidity: 20-80% relative humidity
- Archival Storage (long-term) Environment Temperature: 16-25 degrees centigrade
- Archival Storage (long-term) Environment Humidity: 20-50% relative humidity
- Wet Bulb Environment Temperature (Operational, Short & Long Term Storage): not to exceed 26 degrees centigrade maximum