EKWB EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block
SKU# AC19296, Model# 3831109813157

$228.98

SKU # AC19296 | Model # 3831109813157

See an error? Click here and let us know

EKWB EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block - Materials: Nickel + Acetal - High-performance water block - Mounting mechanism with screw-in brass standoffs - 2x Nickel plated brass plug G1/4" - 6mm Allen Key - Thermal Pads - Thermal grease EK-TIM Ectotherm - Compatible with RGB sync software - 3831109813157 - 2 Years Limited Warranty

Manufacturer Warranty: 2 Years Limited Warranty
Manufacturer Contact Info: www.ekwb.com,

· Materials: Nickel-plated Electrolytic Copper + High-quality Black POM Acetal
·  Open Split-Flow cooling engine design
· Jet plate and fin structure geometry provide even flow distribution with minimal losses and optimal performance
· Front aesthetic corner piece is lit up with an LED strip that can be easily removed
· Compatible with all reference design GeForce RTX 20x0 based graphics cards

EK-Vector RTX 2080 RGB - Nickel + Acetal VGA Water Block

The EK-Vector RTX 2080 RGB - Nickel + Acetal high-performance water block is specially designed for multiple NVIDIA® GeForce® RTX Turing based graphics cards. The water block itself uses the signature EK single slot slim look, and it covers the entire PCB length. This sophisticated cooling solution will transform your beefy graphics card into a minimalistic, elegant piece of hardware.

Read more about EKWB EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block on the official EKWB website

 

EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block - Desktop Overview 1

EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block - Desktop Overview 2

Details

This water block is compatible with all reference design GeForce RTX 20x0 based graphics cards, but as always, EKWB recommends that you refer to their EK® Cooling Configurator for a precise compatibility match. 

The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channelled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. 

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. 

EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block - Desktop Overview 3

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality black POM Acetal. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with LED strip and can be easily removed to replace the LED strip with your preferred solution. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. 

EK-Vector RTX 2080 RGB - Nickel + Acetal GPU Water Block - Desktop Overview 4

EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.

G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to EKWB GPU Terminals. The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.

The NVIDIA® NVLink is compatible with this water block. 

Enclosed:

- EK-Vector series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

Additional Info

Material / Design / Color option Nickel Acetal
Threads G1/4
Chip Manufacturer Nvidia GeForce

SKU # AC19296 | Model # 3831109813157

See an error? Click here and let us know

loading