EKWB EK-Torque HTC-16 16mm G1/4" Fitting - Nickel
SKU# AC27085, Model# 3831109813874

$1,571.99
Own it now, pay later

SKU # AC27085 | Model # 3831109813874

See an error? Click here and let us know

EKWB EK-Torque HTC-16 16mm G1/4" Fitting - Nickel - Thread: G1/4" BSP; 4.5mm Male Thread Length - Supported Tube: 16mm OD - Fitting Outer Diameter: 24mm - Installed Height: 15mm - Nickel Finished CNC Machined Brass Barb and Ring, Rubber O-rings - Compatible with Solid Tubing such as Acrylic, PETG, Copper, Brass and Stainless Steel - 3831109813874 - 2 Years Limited Warranty

Manufacturer Warranty: 2 Years Limited Warranty
Manufacturer Contact Info: www.ekwb.com,

· Cutouts in EKWB's signature EK Quantum shape fit a coloured aesthetic ring (sold separately)
· Locking ring prevents solid tubing from being pulled out of a fitting
· CNC machined brass barb and ring along with quality rubber O-ring seals
· Supports tubes with an outer diameter (OD) of 16mm
· Designed for use with solid tubing such as Acrylic and PETG

EK-Torque HTC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic colour rings (sold separately), and are a perfect match for EK-Quantum series products.

EKWB EK-Torque HTC-16 16mm G1/4" Fitting - Nickel - Desktop Overview 1

The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the coloured aesthetic ring to be shown. The coloured rings are available in many colours and are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately.

EKWB EK-Torque HTC-16 16mm G1/4" Fitting - Nickel - Desktop Overview 2

The fitting barb and the compression rings are covered with a unique, high-quality nickel finish. Both are made of CNC machined brass and the seal is made quality rubber O-rings.

The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. It's highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. Please, be advised not to use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage to other liquid cooling products!

These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling products.

Technical data:
- Finish: Nickel
- Thread: G1/4" BSP; 4.5mm male thread length
- Supported tube: 16mm OD
- The outer diameter of a fitting: 24mm
- Installed height: 15mm
- Compatible solid tubing: Acrylic, PETG, Copper, Brass, Stainless Steel

Made in Europe - Slovenia!

EKWB EK-Torque HTC-16 16mm G1/4" Fitting - Nickel - Desktop Overview 3

SKU # AC27085 | Model # 3831109813874

See an error? Click here and let us know

loading