Deepcool Matrexx 55 V4 ARGB Tempered Glass Mid-Tower ATX Case - Drive Bays: 2+1x 2.5", 2x 3.5" - Expansion Slots: 7 - Cooling: Front: 3x120mm/3140mm; Top: 2120mm/2x140mm; Rear: 1120mm; PSU Shrouded: 2120mm - Front Panel I/O: 2x USB 3.0, 1x Combo Jack - Motherboard Support: Mini-ITX/Micro-ATX/ATX - Features: Pre-Installed Fans: Front: 3x140mm ARGB PWM, Rear: 1x120mm ARGB PWM - 12 Months Limited Warranty - R-MATREXX55-BKADA4-G-4

Manufacturer Warranty: 12 Months Limited Warranty

 The MATREXX 55 V4 is a modern version of the classic MATREXX 55 cases that have been a favorite of system integrators and end users alike.

MATREXX 55 V4

A MODERN TAKE ON A CLASSIC CASE

A CLASSIC DESIGN THAT CANT BE DENIED

The familiar look of the front ARGB fans and front LED strip running down the right side is present, but the fans have been updated to three 140mm PWM-enabled fans in the front and a 120mm ARGB fan in the rear. The tempered glass front panel adds the final premium touch.

MAXIMUM SUPPORT FOR COMPONENTS

With support for up to ATX motherboards, radiators up to 360mm, 165mm tall air coolers, 170mm PSUs, and 370mm long GPUs, finding compatible components will be easier than ever before.

OPTIONAL COOLING CONFIGURATIONS

With the massive heat that current high-end components are producing in this modern era, having a great mix of compatible cooling configurations is a must. The MATREXX 55 V4 doesn't skimp on the most common-sized options.

Fans:
Front: 3x120/3x140mm
Top: 2x120/2x140mm
Rear: 1x120mm
PSU Shroud: 2x120mm

Radiator:
Front: 120/140/240/280/360mm
Top: 120/140/240/280mm
Rear: 120mm

CONVENIENT PORTS AND CONTROL

For your convenience, the MATREXX 55 V4 comes with a host of ports and ARGB controls in the I/O panel. You will find two easily accessible USB 3.0 ports, a hybrid audio port, as well as the ARGB LED controller button within arm's reach.

FLEXIBLE STORAGE SOLUTIONS

The storage drive solutions can be used in various ways, as each 3.5" drive bay can be converted into a 2.5" bay (for example, 2x3.5"+2*2.5" bays or 1x3.5"+3x2.5" bays). The entire HDD cage can even be removed to increase PSU length clearance.

Technical Spec