Antec C7 ARGB Temepred Glass Mid-Tower E-ATX Case - White
SKU# AC77515, Model# C7-ARGB-W

Antec C7 ARGB Temepred Glass Mid-Tower E-ATX Case - White - Materials: Steel + Plastic + Glass - Mainboard Support: E-ATX - Side Panel: 4mm Tempered Glass - Expansion Slots: 7 - Fan Support: Top 3x 120 or 2x 140mm, Side: 3x 120mm, PSU: 3x 120mm, Rear: 1x 120/140mm - Included Fans: 3x 120mm ARGB Fans Right Side + 140mm Rear - Radiator Support: Up to 360mm - C7-ARGB-W

Manufacturer Warranty: 2 Years Limited Warranty

Manufacturer Contact Info: http://www.antec.com, NA

· VERTICAL COOLING

· MULTI-DIRECTIONAL AIR INTAKE AND MASSIVE AIRFLOW

· SIDE RADIATOR INSTALLATION

· SUPPORTS RTX 4090

· FLIP DOOR STORAGE

VERTICAL COOLING

Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow.

 

C7 - CONSTELLATION SERIES

---

 

VERTICAL COOLING

Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow.

---

MULTI-DIRECTIONAL AIR INTAKE AND MASSIVE AIRFLOW

Fine mesh on the top and right panel, and a great number of vents on the front, left and bottom of lower chamber provide massive airflow.

---

PRE-INSTALLED 3 X 120MM ARGB PWM REVERSE FANS & 1 X 140MM ARGB PWM FAN

---

2 X 360MM RADS

Supports simultaneous installation of 360mm radiators on the top and side.

---

Side Radiator Installation

Remove the small cover on the PSU shroud to install a side radiator. Overall thickness up to 70mm.
(*When installed a side radiator with more than 52mm thickness, GPU length is limited to 280mm.)

---

SUPPORT RTX 4090

No interference between side radiator with standard thickness (52mm) and RTX 4090.

---

ALL REUSABLE FULLY-OPEN
PCI SLOT COVERS

Configured with 7 reusable PCI slot covers, which can be turned 90* to mount the GPU vertically (additional riser cable needed).

---

Support Back-Connect Motherboards

Plug in cables from behind to give front a cleaner look and a smoother airflow channel.

---

FLIP DOOR STORAGE

Right flip door supports up to 2 x 3.5" HDD /2.5" SSD and 2 x 2.5" SSD. The tray in the case bottom accommodates 3.5" HDD/2.5" SSD.

---

MULTIPLE HARD DRIVES

Supports multiple hard drives, with different compatibility depending on the form factor of installed motherboard, 3 x 3.5" HDD or 5 x 2.5" SSD at most.

---

DUST FILTER

Front: Magnetic filter
Left: Magnetic filter
Bottom: Full-size pull-out filter

---

REAR PULL PSU MOUNT & EVA CUSHION PADS

For easier PSU installation and safer operation.

---

I/O PANEL

Power
LED Control Button
Type-C 10Gbps x 1
Headphone/Mic Combo Jack
USB 3.0 x2

---

COOLING COMPATIBILITY

---